Jump to content
Brewer Fanatic

OT: Display cases for 5-inch Retro Friday Bobbleheads


jodo23

I'm not looking to sell or trade anything, just wanted to share something that I came across.

 

While looking for a way to display my 5" Retro bobbles, I found that most mirrored bat display cases were about 1/2" too short. I then found this display case:

 

www.tcbulk.com/scripts/prodview.asp?idproduct=86

 

The tiered stand and gold risers can be removed, so you end up with approximately 5.5 inches clear on the inside. The length of the case will easily fit all 13 bobbleheads inside. (See the picture below for an example)

 

The only downside is that by removing the tiered stand, the acrylic top becomes "loose" (there's nothing to keep it from sliding left-right, or to the front), but this can be rectified by adding (homemade) glued-in-place "stops" on the inside.

 

I was able to find these cases on ebay for $65 each (including shipping).

 

I hope this information comes in useful to somebody!

 

-Jody

 

http://my.execpc.com/~jfriese/IMG_5382%20small.JPG

 

(Yes, I'm missing the Pinstripe Cooper... damned rainchecks!)

Link to comment
Share on other sites

Recommended Posts

Archived

This topic is now archived and is closed to further replies.

The Twins Daily Caretaker Fund
The Brewer Fanatic Caretaker Fund

You all care about this site. The next step is caring for it. We’re asking you to caretake this site so it can remain the premier Brewers community on the internet. Included with caretaking is ad-free browsing of Brewer Fanatic.

×
×
  • Create New...